Step 5 – Connecting Stethee Pro to a Mobile Device

  • Last Published Date: March 10, 2021

Download Stethee Pro App 

Use the QR code below to scan and download the Mobile Application.  

Follow the instructions to install the app on your mobile device. 

Once installed, launch Stethee Pro Mobile App and when prompted, create a new account, or enter your existing username and password to login. 
 

The first time you log into Stethee Pro app, you will be asked to setup a PIN.
 

Entering Bluetooth Pairing Mode

Power on Stethee Pro. During the LED Power ON rainbow animation sequence*, push and hold down the Control Button continuously until the LED Ring flashes BLUE and WHITE. 

Once the LED Ring flashes BLUE and WHITE, release the Control Button. 

The device is now in Bluetooth pairing mode. It will stay in this state for up to 5 minutes. 

*You must push and hold down the control button during the rainbow animation sequence. If you miss the rainbow animation sequence, you must POWER OFF and start again. 
 

 

 

Pairing Stethee Pro to a Mobile Device 

You can pair your Stethee Pro to your mobile device via the Stethee Pro Mobile Application (recommended)  or your mobile device Settings. 
 

Pairing via Stethee Pro Mobile Application  

Open the Stethee Pro Mobile App and select the Stethee Pro Settings icon. 

Place Stethee Pro in Bluetooth Pairing Mode (see Entering Bluetooth Pairing Mode ) and wait for 10-40 seconds. 
Select your device from the list of accessories. The Stethee Pro Settings icon in the top right-hand corner of the Mobile App will change status and is now ready to use.
 

Pairing via your mobile device Settings 

Place Stethee Pro in Bluetooth Pairing Mode (see Entering Bluetooth Pairing Mode ). 

Go to your mobile device Settings > Bluetooth to search for the available Bluetooth devices.  

Stethee Pro will display as “Not Connected”. 

Select Stethee Pro from the list of available devices.
Once the device is connected, it will appear in your Bluetooth device menu as “Connected”. The LED Ring will change status from Flashing Blue and White to Flashing Blue once a successful connection has been established. You have successfully connected your Stethee Pro to the Stethee Pro Mobile App. A prompt will appear asking if you would like to communicate with M3DICINE STETHEE PRO.
Selecting “Allow” will direct you to the Mobile App.

Congratulations, you can now start recording auscultations!

 

 

 


Contact Support